단축키 · 팝업 도구 · 거래처 등록 · 앱 설정
처음이어도 5분이면 시작할 수 있습니다.Shortcuts · Popup tools · Client registration · Settings
Get started in 5 minutes, even on your first try.
어떤 창이 포커스를 가지고 있어도 전역으로 즉시 실행됩니다.Global hotkeys work no matter which window has focus.
마지막 케이스의 거래처 특이사항을 표시합니다. 다시 누르면 닫힘. 열린 환자가 없으면 "열림 환자 없음" 팝업이 뜹니다(별도 안내창은 뜨지 않습니다).Shows notes for the last case. Press again to close. If no patient is open, a "No open patient" popup appears (no separate notice dialog).
거래처 팝업 없이 화면 우측 하단에 익명 채팅창만 띄웁니다. 채팅만 쓰고 싶을 때 편리하며, 다시 누르면 닫힙니다.Opens just the anonymous chat window at the bottom-right — no clinic popup. Handy when you only want to chat; press again to close.
거래처 목록 웹 대시보드를 엽니다.Opens the client management web dashboard.
언어·CAD 경로·인터페이스 등을 설정합니다.Language, CAD path, interface, etc.
Alt+1로 수동으로 불러올 수 있습니다. 거래처 관리(대시보드)는 트레이 아이콘 우클릭 → 거래처 관리 또는 웹에서 clinicviewer.com/dashboard로 여세요.If the popup doesn't appear automatically, press Alt+1. Open client management from the tray icon → Clients, or on the web at clinicviewer.com/dashboard.거래처 팝업의 버튼 — 메모 · Editor · Inspector · JIG.Buttons on the clinic popup — Memo · Editor · Inspector · JIG.
화면을 캡처해 펜과 텍스트(T 도구)로 주석을 답니다. 배치한 텍스트는 드래그로 옮길 수 있고, 완료를 누르면 클립보드로 복사됩니다. 💾 이미지로 저장으로 PNG 저장도 가능합니다.Capture the screen and annotate with a pen and text (T tool). Placed text can be dragged to reposition; Done copies it to the clipboard, and 💾 Save as Image exports a PNG.
STL/OBJ/PLY 불러오기·내보내기, Cube·원기둥·훅 생성(mm 단위), 기즈모로 이동/회전/크기(Ctrl로 회전 15°·격자 스냅), 두 객체 불리언(합/차/교집합), 축 변환(3S↔Exo), Flip Normal, 되돌리기/다시(Ctrl+Z/Y)를 지원합니다. 여기에 더해 — 📌 부위 핀: 모델에 시작점을 찍고 드래그해 끝점까지 얇은 원기둥으로 연결하고 끝에 설명을 답니다(여러 개). 📝 전체 메모: 전체 코멘트를 포스트잇으로. 🌐 HTML 내보내기: 핀과 메모가 그대로 담긴 자기완결형 3D 뷰어 HTML을 만들어, 거래처에 보내면 어느 브라우저에서든 회전·확대하며 부위별 설명을 볼 수 있습니다(3S는 Y-up, Exo는 Z-up 그리드).Import/export STL/OBJ/PLY, create Cube/Cylinder/Hook (mm), transform with a gizmo (Ctrl for 15° rotation and grid snap), run boolean (union/subtract/intersect), axis convert (3S↔Exo), Flip Normal, and undo/redo (Ctrl+Z/Y). On top of that — 📌 Part pins: click a start point on the model and drag to an end point connected by a thin cylinder, with a label at the tip (multiple allowed). 📝 Overall memo: attach a sticky note. 🌐 HTML export: build a self-contained 3D viewer HTML with the pins and memo baked in — send it to a clinic and they can rotate, zoom and read per-part notes in any browser (Y-up grid for 3S, Z-up for Exo).
두 모델이 얼마나 맞는지 눈으로 확인하는 도구입니다. 왼쪽에 이동 객체, 오른쪽에 기준 객체를 불러오고(STL · PLY · OBJ, 창에 끌어다 놓아도 됩니다) 양쪽에서 같은 위치 3점을 클릭한 뒤 [🎯 정합 + 히트맵]을 누릅니다. 3점으로 대략 맞춘 다음 ICP로 정밀 정렬하고, 표면 편차를 히트맵으로 칠합니다 — 가까울수록 파랑, 멀수록 빨강이며 안으로 파였든 밖으로 떴든 거리만 봅니다. 평균 편차 · RMS · 최대(+) · 최대(−) · 공차 이내 비율이 함께 표시되고, 공차 ±와 스케일 상한을 바꾸면 색이 바로 다시 칠해집니다. 정렬이 끝나면 [💾 정합 STL] · [💾 정합 PLY]로 옮겨진 좌표 그대로 내보내 다음 작업에 바로 쓸 수 있습니다.A tool for seeing how well two models match. Load the moving model on the left and the reference on the right (STL · PLY · OBJ, drag-and-drop works), click the same 3 points on each side, then press [🎯 Register + Heatmap]. The 3 points give a rough fit, ICP refines it, and surface deviation is painted as a heatmap — blue where they meet, red where they drift, judged on distance only, whether the surface sits inside or outside. Mean · RMS · Max (+) · Max (−) · within-tolerance % are listed alongside, and changing Tolerance ± or Scale max repaints instantly. Once aligned, [💾 Aligned STL] · [💾 Aligned PLY] export the model in its new coordinates, ready for the next step.
JIG 버튼을 누르면 지금 Exo system에서 열려 있는 케이스 폴더를 자동으로 인식해 브라우저 JIG generator가 열립니다(폴더 선택 불필요). 임플란트 verification JIG(상부 + 인접치 윙 + 스크류 홀, 밑면은 구강 스캔으로 음각)를 만들고, 결과 STL을 케이스 폴더에 바로 저장합니다. 모든 처리는 이 PC 안(로컬)에서 이뤄지며 환자 데이터는 밖으로 나가지 않습니다. 경로 정보가 없는 케이스(Exo system에서 직접 생성)는 버튼이 비활성화됩니다. 별도 좌표 설정은 필요 없습니다 — JIG 생성기가 Exo system의 좌표계를 자동으로 감지·보정합니다.Click JIG and the app auto-detects the case folder currently open in Exo system, launching the browser JIG generator (no folder picking). It builds an implant verification JIG (superstructure + adjacent-tooth wings + screw holes, undercut engraved from the intraoral scan) and saves the STL straight back into the case folder. Everything runs locally on this PC — patient data never leaves it. Cases with no path info (created directly in Exo system) leave the button disabled. No coordinate setup is needed — the JIG generator auto-detects and corrects Exo system's coordinate frame.
팝업 상단 티커의 💬 메시지 아이콘을 누르면 같은 시스템을 쓰는 기공사들의 익명 채팅방이 열립니다. PC별 익명으로 참여하고, 우측 ⚙️ 톱니바퀴에서 닉네임(친근한 랜덤 닉 — 변경은 1주에 한 번)과 지역(KR·JP·US)을 설정합니다. 내가 쓴 글은 오른쪽에 표시되고, 메시지는 매일 자정에 초기화됩니다. 개인정보·비속어는 자동으로 가려집니다.Click the 💬 message icon in the top ticker to open an anonymous chat for technicians on the same system. You join anonymously per PC; use the ⚙️ gear on the right to set your nickname (friendly random name — changeable once a week) and region (KR/JP/US). Your own messages appear on the right, and messages reset daily at midnight. Personal info and profanity are auto-masked.
팝업 상단의 뉴스채널이 우→좌로 흐릅니다. 등록된 소식이 차례로 지나가며, 클릭하면 해당 링크가 열립니다.A news channel scrolls right to left at the top of the popup. Posts scroll by in turn; click one to open its link.
소수는 직접 입력, 여러 건은 엑셀 업로드를 권장합니다.Enter a few manually; use Excel upload for many.
트레이 우클릭 → 거래처 관리 또는 웹 대시보드에서 + 거래처 추가. 거래처명·담당의사·컨택양·바이트양·훅/홀·추가사항을 입력해 저장합니다.Tray → Clients or the web dashboard, then + Add client. Enter clinic name, doctor, contact, bite, hook/hole, and notes, then save.
대시보드에서 엑셀 다운로드로 현재 목록을 받아 템플릿으로 쓰고, 작성 후 엑셀 업로드로 한 번에 등록합니다. 거래처명이 같으면 기존 내용을 덮어씁니다.Use Download Excel to get the current list as a template, fill it in, then Upload Excel. Rows with the same clinic name overwrite existing entries.
clinicviewer.com/dashboard에 접속해 어디서든 등록·수정. 변경은 모든 PC에 즉시 반영됩니다.Open clinicviewer.com/dashboard to edit anywhere. Changes sync to all PCs instantly.
Z:\CAD\삼성치과\Kim_SB001.3ox → 거래처명 삼성치과The clinic name must match the folder name in the Exo file path for the popup to appear. e.g. Z:\CAD\SamsungDental\Kim_SB001.3ox → clinic name SamsungDentalAlt+4 또는 트레이 우클릭 → 설정.Alt+4 or tray → Settings.
Exo system 케이스 저장 루트를 지정합니다. 이 경로 아래 .3ox 변경을 감시해 거래처를 자동 인식합니다.Set the Exo system case root. The app watches .3ox changes under it to detect clients automatically.
Exo system PC의 DentalDB\config\defaultsettings-db.xml을 선택하면 PathTemplate·CAD 루트·DB 경로가 한 번에 채워집니다. DB가 CAD 루트와 다른 폴더에 있을 때만 DB 경로를 따로 지정하세요.Pick DentalDB\config\defaultsettings-db.xml from the Exo system PC to auto-fill PathTemplate, CAD root and DB path at once. Set the DB path separately only if the DB lives in a different folder.
설정 창의 인터페이스 탭에서 다크/라이트 테마, 디자인 스타일(기본/플로팅), 글자 크기, 팝업 페이드인·알림음을 조절합니다. 테마·글자 크기는 저장 시 앱을 다시 실행하면 적용됩니다.In the Interface tab, set dark/light theme, design style (classic/floating), font size, and popup fade-in/sound. Theme and font size apply after you relaunch the app.
항상 위로 팝업을 다른 창 위에 고정하고, 시작 프로그램 등록으로 Windows 시작 시 자동 실행합니다. 언어(한/영/일)는 설정에서 바꾼 뒤 앱을 다시 실행하면 적용됩니다.Keep the popup on top with Always on top, and auto-launch at Windows startup with Register startup. Language (KO/EN/JA) applies after you relaunch the app.
Alt+4(설정) → CAD 루트 경로가 맞는지, 거래처명이 경로 폴더명과 일치하는지 확인하세요. Alt+1로 수동 확인 가능합니다.Alt+4 (settings) → check the CAD root path and that the clinic name matches the path folder. Use Alt+1 to trigger it manually.
3S system 작업 중 어떤 창에서도 전역으로 실행됩니다.Global hotkeys work from any window while using 3S system.
마지막으로 연 케이스의 거래처 특이사항을 표시합니다. 다시 누르면 닫힘. 열린 환자가 없으면 "열림 환자 없음" 팝업이 뜹니다(별도 안내창은 뜨지 않습니다).Shows notes for the last opened case. Press again to close. If no patient is open, a "No open patient" popup appears (no separate notice dialog).
거래처 팝업 없이 화면 우측 하단에 익명 채팅창만 띄웁니다. 채팅만 쓰고 싶을 때 편리하며, 다시 누르면 닫힙니다.Opens just the anonymous chat window at the bottom-right — no clinic popup. Handy when you only want to chat; press again to close.
거래처 목록 웹 대시보드를 엽니다.Opens the client management web dashboard.
언어·케이스 폴더 경로·인터페이스 등.Language, case folder, interface, etc.
거래처 관리 또는 clinicviewer.com/dashboard에서 여세요.Open client management from the tray → Clients, or at clinicviewer.com/dashboard.거래처명을 그대로 적는 것 — 별도 설정 없이 인식됩니다. 스캐너 연동으로 고객(Customer) 드롭다운을 쓴다면 그 값도 인식됩니다(Control Panel → 고객 리스트에서 미리 등록). 담당자·고객·주문번호 어디든 등록한 거래처명이 포함되면 자동 인식됩니다.Clinic name — the app reads the clinic name from the 3S system order info, not the folder name. The easiest way: type your registered clinic name in the order form's Contact Person field — recognized with no extra setup. If you use the Customer dropdown (scanner integration), that value is recognized too (register it first in Control Panel → Customers). It matches if the registered clinic name appears in the Contact Person, Customer, or order number.거래처 팝업의 버튼 — 메모 · Editor · Inspector · JIG.Buttons on the clinic popup — Memo · Editor · Inspector · JIG.
화면을 캡처해 펜과 텍스트(T 도구)로 주석을 답니다. 배치한 텍스트는 드래그로 옮길 수 있고, 완료를 누르면 클립보드로 복사됩니다. 💾 이미지로 저장으로 PNG 저장도 가능합니다.Capture the screen and annotate with a pen and text (T tool). Placed text can be dragged to reposition; Done copies it to the clipboard, and 💾 Save as Image exports a PNG.
STL/OBJ/PLY 불러오기·내보내기, Cube·원기둥·훅 생성(mm 단위), 기즈모로 이동/회전/크기(Ctrl로 회전 15°·격자 스냅), 두 객체 불리언(합/차/교집합), 축 변환(3S↔Exo), Flip Normal, 되돌리기/다시(Ctrl+Z/Y)를 지원합니다. 여기에 더해 — 📌 부위 핀: 모델에 시작점을 찍고 드래그해 끝점까지 얇은 원기둥으로 연결하고 끝에 설명을 답니다(여러 개). 📝 전체 메모: 전체 코멘트를 포스트잇으로. 🌐 HTML 내보내기: 핀과 메모가 그대로 담긴 자기완결형 3D 뷰어 HTML을 만들어, 거래처에 보내면 어느 브라우저에서든 회전·확대하며 부위별 설명을 볼 수 있습니다(3S는 Y-up, Exo는 Z-up 그리드).Import/export STL/OBJ/PLY, create Cube/Cylinder/Hook (mm), transform with a gizmo (Ctrl for 15° rotation and grid snap), run boolean (union/subtract/intersect), axis convert (3S↔Exo), Flip Normal, and undo/redo (Ctrl+Z/Y). On top of that — 📌 Part pins: click a start point on the model and drag to an end point connected by a thin cylinder, with a label at the tip (multiple allowed). 📝 Overall memo: attach a sticky note. 🌐 HTML export: build a self-contained 3D viewer HTML with the pins and memo baked in — send it to a clinic and they can rotate, zoom and read per-part notes in any browser (Y-up grid for 3S, Z-up for Exo).
두 모델이 얼마나 맞는지 눈으로 확인하는 도구입니다. 왼쪽에 이동 객체, 오른쪽에 기준 객체를 불러오고(STL · PLY · OBJ, 창에 끌어다 놓아도 됩니다) 양쪽에서 같은 위치 3점을 클릭한 뒤 [🎯 정합 + 히트맵]을 누릅니다. 3점으로 대략 맞춘 다음 ICP로 정밀 정렬하고, 표면 편차를 히트맵으로 칠합니다 — 가까울수록 파랑, 멀수록 빨강이며 안으로 파였든 밖으로 떴든 거리만 봅니다. 평균 편차 · RMS · 최대(+) · 최대(−) · 공차 이내 비율이 함께 표시되고, 공차 ±와 스케일 상한을 바꾸면 색이 바로 다시 칠해집니다. 정렬이 끝나면 [💾 정합 STL] · [💾 정합 PLY]로 옮겨진 좌표 그대로 내보내 다음 작업에 바로 쓸 수 있습니다.A tool for seeing how well two models match. Load the moving model on the left and the reference on the right (STL · PLY · OBJ, drag-and-drop works), click the same 3 points on each side, then press [🎯 Register + Heatmap]. The 3 points give a rough fit, ICP refines it, and surface deviation is painted as a heatmap — blue where they meet, red where they drift, judged on distance only, whether the surface sits inside or outside. Mean · RMS · Max (+) · Max (−) · within-tolerance % are listed alongside, and changing Tolerance ± or Scale max repaints instantly. Once aligned, [💾 Aligned STL] · [💾 Aligned PLY] export the model in its new coordinates, ready for the next step.
JIG 버튼을 누르면 지금 DentalDesigner 에서 열려 있는 케이스를 자동으로 인식해 브라우저 JIG generator 가 열립니다. 3Shape 케이스의 메시는 .dcm 이라 JIG 가 바로 읽지 못하므로, 앱이 필요한 요소(지대주 · 상부구조 · 스캔)만 골라 PLY 로 변환한 뒤 넘깁니다. 변환 결과는 그 케이스의 Scans 폴더에 남아, 같은 케이스를 다시 열면 재변환 없이 바로 뜹니다. 지그는 Exo 와 똑같이 상부 + 인접치 윙 + 스크류 홀로 만들고, 결과 STL 을 케이스 폴더에 바로 저장합니다. 설계가 아직 없고 스캔만 있는 케이스도 열리며, 이때는 안내가 표시됩니다. JIG 화면의 [케이스 폴더 열기]는 3S 에서 앱의 폴더 선택 창으로 연결됩니다(브라우저 폴더 선택은 .dcm 을 읽지 못합니다).Click JIG and the app auto-detects the case currently open in DentalDesigner, launching the browser JIG generator. 3Shape meshes are .dcm, which the JIG app cannot read directly, so the app picks out only what is needed (abutment · superstructure · scan) and converts it to PLY first. The converted files stay in that case’s Scans folder, so reopening the same case loads instantly, with no re-conversion. The jig itself is built exactly as on Exo — superstructure + adjacent-tooth wings + screw holes — and the STL is saved straight into the case folder. Cases with only a scan and no design still open, with a notice. [Open case folder] in the JIG screen opens the app’s folder picker on 3S (the browser’s own folder picker cannot read .dcm).
.dcm 을 PLY 로 바꾸는 단계에서만 외부 변환 서비스를 거칩니다. 올라가는 것은 형상 블록뿐이며 환자 정보 · 기공사 코멘트 · 스캐너 정보 · 마진라인은 애초에 싣지 않습니다. 지그 배치와 생성은 이 PC 의 브라우저 안에서만 이뤄집니다. (Exo 는 메시가 이미 STL 이라 변환 단계 자체가 없습니다.)About the conversion step — only the .dcm-to-PLY step uses an external conversion service. Just the geometry block is sent; patient details, technician comments, scanner info and margin lines are never included. Placing and building the jig happens entirely in the browser on this PC. (Exo meshes are already STL, so there is no conversion step at all.)팝업 상단 티커의 💬 메시지 아이콘을 누르면 같은 시스템을 쓰는 기공사들의 익명 채팅방이 열립니다. PC별 익명으로 참여하고, 우측 ⚙️ 톱니바퀴에서 닉네임(친근한 랜덤 닉 — 변경은 1주에 한 번)과 지역(KR·JP·US)을 설정합니다. 내가 쓴 글은 오른쪽에 표시되고, 메시지는 매일 자정에 초기화됩니다. 개인정보·비속어는 자동으로 가려집니다.Click the 💬 message icon in the top ticker to open an anonymous chat for technicians on the same system. You join anonymously per PC; use the ⚙️ gear on the right to set your nickname (friendly random name — changeable once a week) and region (KR/JP/US). Your own messages appear on the right, and messages reset daily at midnight. Personal info and profanity are auto-masked.
팝업 상단의 뉴스채널이 우→좌로 흐릅니다. 등록된 소식이 차례로 지나가며, 클릭하면 해당 링크가 열립니다.A news channel scrolls right to left at the top of the popup. Posts scroll by in turn; click one to open its link.
소수는 직접 입력, 여러 건은 엑셀 업로드.Enter a few manually; use Excel upload for many.
트레이 우클릭 → 거래처 관리 또는 웹 대시보드에서 + 거래처 추가. 거래처명은 3S system 주문의 담당자/고객에 적을 이름과 동일하게 등록하세요.Tray → Clients or the web dashboard, then + Add client. Register the clinic name exactly as you'll write it in the 3S system order's Contact Person / Customer.
엑셀 다운로드로 템플릿을 받아 작성 후 엑셀 업로드. 같은 거래처명은 덮어씁니다.Get a template via Download Excel, fill it in, then Upload Excel. Same clinic name overwrites.
| 열Column | 예시Example |
|---|---|
| 거래처명 / Clinic name | 삼성치과 / SamsungDental |
| 담당의사 / Doctor | 김원장 / Dr. Kim |
| 컨택양 / Contact | - / 약 / 강 |
| 바이트양 / Bite | O / X / - |
| 훅·홀 / Hook·Hole | 싱글만 · O/X |
| 추가사항 / Notes | 엠브레이져 막아주세요Close the embrasure |
Alt+R 또는 트레이 우클릭 → 설정.Alt+R or tray → Settings.
3S system 케이스 저장 루트를 지정합니다(기본 C:\3shape). DentalDesigner로 케이스를 열면 그 케이스가 이 경로 기준으로 인식됩니다.Set the 3S system case root (default C:\3shape). When you open a case in DentalDesigner, it is resolved under this path.
인터페이스 탭에서 테마·글자 크기·팝업 효과를 조절합니다. 항상 위, 시작 프로그램 등록, 언어(한/영/일) 지원. 테마·글자 크기·언어는 저장 후 앱을 다시 실행하면 적용됩니다.Adjust theme, font size and popup effects in the Interface tab. Supports Always on top, Register startup, and language (KO/EN/JA). Theme, font size and language apply after you relaunch the app.
DentalDesigner로 케이스를 열었는지, 주문의 담당자/고객에 등록한 거래처명이 들어있는지 확인하세요. Alt+R(설정)로 케이스 폴더 경로도 확인. Alt+Q로 수동 확인 가능.Make sure you opened the case in DentalDesigner, and that the order's Contact Person/Customer contains a registered clinic name. Check the case folder path via Alt+R (settings). Use Alt+Q to trigger it manually.
최신 버전에서는 내 PC의 DentalDesigner로 연 케이스만 뜹니다. 앱을 최신으로 업데이트하세요(트레이 → 업데이트 확인).In the latest version, only cases opened in DentalDesigner on your own PC pop up. Update the app (tray → Check for updates).